§ Products / Type-IIDRG SYN-120
Type—IIHelix, Light Duty
Type-II is the light helix range, for urban and access alignments where cable runs 11.2 to 14.7 mm and 3W rather than 6W tensile strength. Galvanised rather than aluminised terminating helix, lighter clamps, and two fixtures the heavy range does not carry: the cable storage bracket and the down lead clamp. The universal pole bracket may be substituted for pole-specific collar clamps to cut inventory.
01DRG 12.1
Hover · parts separatingTension Pole Assembly (Light Duty)
→Light duty dead-end set for urban and access alignments.
Below 10 kN3W tensileStrap fixable
02DRG 12.2
Hover · parts separatingSuspension Pole Assembly (Light Duty)
→Light duty helical suspension for intermediate urban poles.
Intermediate polesSVD above 50 mStrap fixable
03SYN-T2-SH-700
Hover · parts separatingSuspension Helix
→Galvanised steel helix gripping the cable at the suspension point.
5 rodsØ 2.59 mm700 mm
04SYN-T2-TH
Hover · parts separatingThimble
→Galvanised mild steel U-thimble that seats the terminating helix bail.
MS, HDGM12 bolt2 per tension set
05DRG 12.3
Hover · parts separatingCable Storage Bracket
→Hot-dip galvanised bracket holding stored slack at a splice or terminating point.
HDG steelSplice loopsPole or wall
06DRG 12.4
Hover · parts separatingDown Lead Clamp
→Supports the cable in the vertical, where it runs down a pole or wall.
Vertical runsInsert 65–80 Shore ABuilding entry