Click the model to take it apart · drag to turn
SYN-T2-SPA · 7 parts
Suspension Pole Assembly (Light Duty)
01 — Overview
Intermediate polesSVD above 50 mStrap fixable
- Code
- SYN-T2-SPA
- Type
- Type-II — Helix type (Light duty)
- Drawing
- TEC GR 12.2
Protective helix, suspension helix, thimble and pole fixing. Dampers are fitted where the span exceeds 50 metres. As with the Type-II termination, the universal pole bracket with stainless strap can replace pole-specific clamps.
02 — Specification
Data sheet
Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.
- Cable diameter
- 11.2 – 14.7 mm
- Suspension load
- 50% of 3W minimum
- Damper threshold
- Spans above 50 m
- Drawing
- TEC GR 12.2
03 — Bill of parts
- 01Pole Clamp or Universal BracketGalvanised steel / aluminium alloy
- 02Twisted Eye LinkMild steel galvanised
- 03Thimble / ClevisAluminium alloy GDC
- 04Protective Helix (S)Aluminium alloy IS 6061
- 05Suspension HelixHot-dip galvanised steel
04 — Why it's built this way
- Suspension helix must slip above its rated load, by design
- Same elastomer and deburring standard as the heavy range
Same type
All Type-II →SYN-T2-TPADRG 12.1
Hover · parts separatingTension Pole Assembly (Light Duty)
→Light duty dead-end set for urban and access alignments.
Below 10 kN3W tensileStrap fixable
SYN-T2-SH-700SYN-T2-SH-700
Hover · parts separatingSuspension Helix
→Galvanised steel helix gripping the cable at the suspension point.
5 rodsØ 2.59 mm700 mm
SYN-T2-THSYN-T2-TH
Hover · parts separatingThimble
→Galvanised mild steel U-thimble that seats the terminating helix bail.
MS, HDGM12 bolt2 per tension set