Click the model to take it apart · drag to turn
SYN-T2-CSB · 5 parts
Cable Storage Bracket
01 — Overview
HDG steelSplice loopsPole or wall
- Code
- SYN-T2-CSB
- Type
- Type-II — Helix type (Light duty)
- Drawing
- TEC GR 12.3
Every route needs slack for future repair and for splicing at ground level rather than at the top of a pole. This bracket stores it on both pole-to-pole and pole-to-wall spans, at regular intervals along the aerial path.
02 — Specification
Data sheet
Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.
- Material
- Hot-dip galvanised steel
- Application
- Splice and terminating points
- Mounting
- Pole-to-pole and pole-to-wall
- Drawing
- TEC GR 12.3
04 — Why it's built this way
- Stores the loop that lets a splice be made at ground level
- Fitted at regular intervals along the aerial path
Same type
All Type-II →SYN-T2-TPADRG 12.1
Hover · parts separatingTension Pole Assembly (Light Duty)
→Light duty dead-end set for urban and access alignments.
Below 10 kN3W tensileStrap fixable
SYN-T2-SPADRG 12.2
Hover · parts separatingSuspension Pole Assembly (Light Duty)
→Light duty helical suspension for intermediate urban poles.
Intermediate polesSVD above 50 mStrap fixable
SYN-T2-SH-700SYN-T2-SH-700
Hover · parts separatingSuspension Helix
→Galvanised steel helix gripping the cable at the suspension point.
5 rodsØ 2.59 mm700 mm