Click the model to take it apart · drag to turn
SYN-T3-UPB · 6 parts
Universal Pole Bracket
01 — Overview
Cast, not extrudedOne bolt or two straps15 – 28 kN
- Code
- SYN-T3-UPB
- Type
- Type-III — Wedge type
- Drawing
- TEC GR 13.7
One bracket instead of a rack of pole-specific clamps. Gravity die-cast from aluminium alloy and heat treated — extruded brackets are not permitted by the GR because of the sharp corners they leave against the cable. Fixed by one bolt or by two stainless steel straps, which is what makes it universal across pole geometries.
02 — Specification
Data sheet
Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.
- Material
- Aluminium alloy IS 617, gravity die cast
- Tensile strength
- 15 kN – 33.5 kN by cable
- Test load
- 2× cable UTS or 15 kN, whichever higher
- Fixing
- One bolt or two SS straps
- Heat treatment
- To required strength after casting
- Drawing
- TEC GR 13.7
03 — Bill of parts
- 01BracketAluminium alloy IS 617, GDC
- 02Stainless Steel StrapASTM SS 202
- 03BuckleASTM SS 304, 1.2 mm minimum
04 — Why it's built this way
- Removes the inventory of pole clamps per pole geometry
- Cast in one piece — no welded or bolted joint in the load path
- Also wall-mountable with an anchor bolt
Same type
All Type-III →SYN-T3-ADADRG 13.1
Hover · parts separatingAnchoring (Dead End) Assembly
→Wedge clamp and pole bracket supplied as a matched anchoring set.
End of runAngle > 20°Matched set
SYN-T3-DECDRG 13.6
Hover · parts separatingDead-End Clamp
→Self-locking wedge clamp with a stainless bail and U-saddle.
Wedge self-lockingBail 400 mmReleases on overload
SYN-T3-SCDRG 13.8
Hover · parts separatingSuspension Clamp
→Thermoplastic body and flange with an elastomer liner that lets the cable slip.
Deviation to 20°Slips 150–260 NStrap or M14 bolt