Click the model to take it apart · drag to turn
SYN-T3-SSB · 2 parts
Stainless Steel Strap and Buckle
01 — Overview
20 × 0.7 mm7.5 kN50 m roll
- Code
- SYN-T3-SSB
- Type
- Type-III — Wedge type
- Drawing
- TEC GR 13.10
The fixing that makes the universal bracket universal. Supplied on a 50 metre roll in a plastic dispenser marked with the remaining length, engraved every 250 mm with manufacturer, month and year for traceability. Buckles come 100 to a bag.
02 — Specification
Data sheet
Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.
- Strap size
- 20 ± 0.2 × 0.7 ± 0.05 mm
- Tensile strength
- 7.5 kN minimum, tested on a loop
- Strap material
- ASTM SS 202
- Buckle material
- ASTM SS 304, 1.2 mm minimum
- Strap elongation
- 30% minimum
- Supply
- 50 m roll, dispenser cased
- Traceability
- Engraved every 250 mm
- Drawing
- TEC GR 13.10
04 — Why it's built this way
- Tested as a loop with its buckle, not as a bare strip
- Remaining length readable from the dispenser
- Loop count allocated to the load of the clamp it carries
Same type
All Type-III →SYN-T3-ADADRG 13.1
Hover · parts separatingAnchoring (Dead End) Assembly
→Wedge clamp and pole bracket supplied as a matched anchoring set.
End of runAngle > 20°Matched set
SYN-T3-DECDRG 13.6
Hover · parts separatingDead-End Clamp
→Self-locking wedge clamp with a stainless bail and U-saddle.
Wedge self-lockingBail 400 mmReleases on overload
SYN-T3-UPBDRG 13.7
Hover · parts separatingUniversal Pole Bracket
→Single-piece cast aluminium bracket, strap or bolt fixed to any pole.
Cast, not extrudedOne bolt or two straps15 – 28 kN