Click the model to take it apart · drag to turn
SYN-T3-DLC · 3 parts
Down Lead Clamp
01 — Overview
7 – 30 mm cableUV thermoplasticStrap fixed
- Code
- SYN-T3-DLC
- Type
- Type-III — Wedge type
- Drawing
- TEC GR 13.11
Fixes the cable down the pole so wind cannot work it against the surface. UV-protected thermoplastic body and tie with a stainless screw, fixed to the pole by stainless strap — so it goes on the same banding as everything else in the Type-III range.
02 — Specification
Data sheet
Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.
- Cable diameter range
- 5 – 30 mm by cable
- Body material
- UV protected thermoplastic
- Cable tie
- UV protected thermoplastic
- Screw
- Stainless steel
- Pole fixing
- Stainless steel strap
- Drawing
- TEC GR 13.11
03 — Bill of parts
- 01BodyUV protected thermoplastic
- 02Cable TieUV protected thermoplastic
- 03ScrewStainless steel
04 — Why it's built this way
- Stops wind movement damaging the cable against the pole
- Fixes on the same stainless strap as the brackets
Same type
All Type-III →SYN-T3-ADADRG 13.1
Hover · parts separatingAnchoring (Dead End) Assembly
→Wedge clamp and pole bracket supplied as a matched anchoring set.
End of runAngle > 20°Matched set
SYN-T3-DECDRG 13.6
Hover · parts separatingDead-End Clamp
→Self-locking wedge clamp with a stainless bail and U-saddle.
Wedge self-lockingBail 400 mmReleases on overload
SYN-T3-UPBDRG 13.7
Hover · parts separatingUniversal Pole Bracket
→Single-piece cast aluminium bracket, strap or bolt fixed to any pole.
Cast, not extrudedOne bolt or two straps15 – 28 kN