Adjustable Cable Storage Bracket

01 — Overview

8 coils270 – 960 mmAdjustable

Code: SYN-T3-ACSB
Type: Type-III — Wedge type
Drawing: TEC GR 13.9

Four-arm aluminium rack storing up to eight coils of slack.

A cross-shaped cast bracket carrying four capped rods, adjustable on M10 bolts so the coil diameter can be set to the cable's minimum bend radius rather than the other way round. Used mid-span to hold the spare cable a joint will need.

02 — Specification

Data sheet

Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.

Coil diameter: 270 – 960 mm by cable
Maximum number of coils: 8 (13 for drop cable)
Bracket material: Aluminium alloy IS 617
Rod material: Aluminium alloy or galvanised steel
Fasteners: M10 HDG, IS 1367 Part 13
Drawing: TEC GR 13.9

03 — Bill of parts

01
Bracket
Aluminium alloy IS 617
02
Rod ×4
Aluminium alloy / galvanised steel
03
Cap ×4
Aluminium alloy
04
M10 Bolt ×4
Galvanised steel, IS 1363 Part 1
05
M10 Nut ×4
Galvanised steel, IS 1363 Part 3
06
M10 Washer ×4
Galvanised steel, IS 2016

04 — Why it's built this way

Coil diameter set on site to the cable's own bend radius
All threaded parts hot-dip galvanised against rust and seizure
Retrievable by one person, from the pole

Same type

All Type-III →

SYN-T3-ADADRG 13.1

Hover · parts separating

Anchoring (Dead End) Assembly

→

Wedge clamp and pole bracket supplied as a matched anchoring set.

End of runAngle > 20°Matched set

SYN-T3-DECDRG 13.6

Hover · parts separating

Dead-End Clamp

→

Self-locking wedge clamp with a stainless bail and U-saddle.

Wedge self-lockingBail 400 mmReleases on overload

SYN-T3-UPBDRG 13.7

Hover · parts separating

Universal Pole Bracket

→

Single-piece cast aluminium bracket, strap or bolt fixed to any pole.

Cast, not extrudedOne bolt or two straps15 – 28 kN