Click the model to take it apart · drag to turn
SYN-T1-PCC-T · 4 parts
Pole Collar Clamp (Tubular)
01 — Overview
Tubular polesHDGMade to pole size
- Code
- SYN-T1-PCC-T
- Type
- Type-I — Helix type (Heavy duty)
- Drawing
- TEC GR 11.4
Fixes to the pole and presents a twisted eye for the turn buckle or suspension link. Sized to the pole, so a section is supplied against the actual pole diameters in the installation rather than from a single stock size — the GR allows for minor deviations to suit the particulars of a section.
02 — Specification
Data sheet
Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.
- Pole type
- Tubular
- Material
- Galvanised mild steel
- Galvanising
- Hot dip, IS 2629
- Tensile requirement
- 6W with factor of safety 2
- Drawing
- TEC GR 11.4
04 — Why it's built this way
- Supplied to the pole diameters of the section, not a single stock size
- Uniformity of galvanising tested to IS 2633
Same type
All Type-I →SYN-T1-TPADRG 11.1
Hover · parts separatingTension Pole Assembly
→The complete dead-end set for a tension, angle or splice pole.
Above 10 kNAngle > 15°Matched set
SYN-T1-SPADRG 11.2
Hover · parts separatingSuspension Pole Assembly
→Armour grip suspension for intermediate poles on a straight run.
Intermediate polesElastomer padSVD both sides
SYN-T1-AGSDRG 11.3
Hover · parts separatingArmour Grip Suspension Set
→Ball-ended armour grip helix over protective helix, in a die-cast clipper.
15 rodsØ 4.25 mmBall-ended