Click the model to take it apart · drag to turn
SYN-T1-CT-102 · 3 parts
Clevis Thimble
01 — Overview
W 92 mmR 46 / 30Alloy GDC
- Code
- SYN-T1-CT-102
- Type
- Type-I — Helix type (Heavy duty)
- Drawing
- TEC GR 11.9
The interface between the formed helix and the steel hardware. The smooth internal contour accommodates the loop of the helically formed terminating helix so the loop is never kinked, and the clevis at the top takes the extension link. For power line applications an insulator may be used in place of the thimble for additional protection.
02 — Specification
Data sheet
Figures quoted from the governing GR drawing tables and Annexure A. Values marked (P) pending production data.
- Height (L1)
- 102 mm
- Clevis height (L2)
- 42 mm
- Boss height (L3)
- 15 mm
- Section thickness (T1)
- 4 mm
- Outer radius (R1)
- 46 mm
- Groove radius (R2)
- 30 mm
- Overall width (W1)
- 92 mm
- Pin diameter (D1)
- 16 mm
- Drawing
- TEC GR 11.9
03 — Bill of parts
- 01ClampAluminium alloy GDC, IS 617
- 02Rivet M16 × 45Galvanised steel, IS 2016
- 03WasherGalvanised steel, IS 2016
- 04Split PinStainless steel, IS 549
04 — Why it's built this way
- Smooth internal contour — the loop seats, it does not bend
- Cast not extruded, so no sharp edges against the helix
- Ferrous parts hot-dip galvanised to IS 2629
Same type
All Type-I →SYN-T1-TPADRG 11.1
Hover · parts separatingTension Pole Assembly
→The complete dead-end set for a tension, angle or splice pole.
Above 10 kNAngle > 15°Matched set
SYN-T1-SPADRG 11.2
Hover · parts separatingSuspension Pole Assembly
→Armour grip suspension for intermediate poles on a straight run.
Intermediate polesElastomer padSVD both sides
SYN-T1-AGSDRG 11.3
Hover · parts separatingArmour Grip Suspension Set
→Ball-ended armour grip helix over protective helix, in a die-cast clipper.
15 rodsØ 4.25 mmBall-ended